Changing The Colour; Cleaning And Care; Technical Specifications - STÄDTER 330115 Manual De Uso

english

changing the colour

• After use always empty the colour from the liquid container. Fill it with water and spray until
no colour remains.
• After this you may pour a new colour into the pistol container.
• We recommend cleaning with a STÄDTER airbrush cleaning station.

cleaning and care

• After use always empty colour from the liquid container and clean it with water or a suitable
solvent (e.g. alcohol) with the aid of a brush.
• Fill colour container with water or solvent. Now close needle opening with the fingers and
at the same time activate the lever. Now the air stream flows back into the jet, so that any
colour remaining in the pistol is removed.
• Carefully remove needles and clean them. Then clean the jet.
• We recommend cleaning with a STÄDTER airbrush cleaning station.
• The compressor should never be immersed in water or held under running water. When
cleaning, do not allow water to penetrate the compressor.
WArning!
• Use alcohol only for cleaning the airbrush pistol, but definitely not for cleaning the compres-
sor! Simply wipe compressor with a damp cloth.
• Please never use abrasive cleaning substances, hard brushes or metallic objects to clean the
plastic parts of the appliance.

tecHnicAl sPeciFicAtiOns

Voltage:
Power:
Pressure performance auto start:
Pressure performance auto stop:
Pressure adjustment range:
Air performance:
Capacity of air tank:
Capacity of liquid container:
Jet diameter:
Speed/minute:
Dimensions:
Net weight:
Air exhaust:
Actual models may differ!
cleAning AnD cAre · tecHnicAl sPeciFicAtiOns
220-240V 50 Hz
1/6 hp
3 bar (43 PSI)
4 bar (57 PSI)
0.3 – 3.9 bar (5-57 PSI)
20-23 l/min
0.4 l
10 ml
0.3 mm
50 Hz/60 Hz (1450/1700)
250 x 140 x 205 mm
3.93 kg
(1/8")
GB
21