Rear Panel - Marantz professional PMD-300CP Guia Del Usuario

7. Play Cr02 Button: This feature should be set depending on the kind of tape you are playing.
When using normal tapes, this feature should be turned off ("PLAY Cr02" not lit on the
display). When using Cr02 tapes, this features should be turned on ("PLAY Cr02" is lit on
the display).
8. Dubbing Button: Press this button if you would like to dub a tape from deck A to a tape in
deck B ("DUBBING" will light on the display).
9. Hi Sp Dub Button: Press this button to enable high-speed dubbing ("HIGH SPEED" will
light on the display). Press again to disable high-speed dubbing.
10. Rec Cr02 Button: Turn this feature on when recording to a Cr02 tape on deck B ("REC
Cr02" is lit on the display).
11. Play Press to play the tape on the corresponding deck.
12. Rewind: Press to rewind the tape on the corresponding deck.
13. Fast Forward: Press to fast forward the tape on the corresponding deck.
14. Stop / Eject: Press to stop the tape on the corresponding deck. When stopped, press again
to open the cassette holder.
15. Pause: Press to pause the tape on the corresponding deck. Press again to resume
playback.
16. Record: Press this button in conjunction with the Play button to begin recording.

Rear Panel

2
3
1. Power Cord: Plug this cord into a power socket before powering on the unit. If not using
the unit for prolonged periods of time, please remember to turn it off and remove the cord
from the socket.
2. USB Port: Connect this port to an available USB port on your computer when transferring
tapes.
Note: Visit marantzpro.com
backup your tapes digitally.
3. Gain Knob: This knob can be used to adjust the audio signal from the unit to your
computer. If you experience distortion and clipping when recording to your computer, we
recommend turning down the Gain. If the audio level from the unit is extremely low when
recording to your computer, we recommend turning up the Gain.
4. Rec Input: Connect a stereo RCA cable from an external source to this input. Please note
that recording and dubbing only works on deck B.
5. Play Output: This is the combined audio output from deck A and deck B. Connect a stereo
RCA cable from this output to the Line or Auxiliary input of a home stereo receiver system.
4
4
5
to download the tape converter software to transfer and
1