Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
DO NOT pump sea/salt water which may
cause accelerated corrosion.
•
DO NOT use your pump where there is
a risk of causing a fire or an explosion;
e.g. in the presence of flammable liquids,
gasses, or dust. Gasoline engines can
create sparks, which may ignite the dust
or fumes.
WARNING! Unintentional sparking
could cause fire or electric shock
resulting in death or serious injury.
•
NEVER operate water pump without
protective housing or covers.
WARNING! Risk of eye or bodily
injury. Spray could splash back or
propel objects resulting in serious
injury.
•
Always wear protective clothing such
as a long-sleeved shirt, long pants and
close-toed shoes.
•
NEVER operate water pump when
barefoot or wearing sandals or shorts.
When Transporting, Moving Or Repairing
Equipment:
•
Disconnect the FLEX™ Water Pump
attachment from the Power Base prior to
attempting to load, repair or transport
this device.
•
Follow instructions in the FLEX™ Power
Base operator's manual for Transporting
the FLEX™ Power Base.
•
Use care when loading or unloading this
attachment onto a trailer or truck.
•
This attachment must be secured onto
the trailer or truck with straps, chains,
cables, ropes, or other means deemed
adequate for that purpose.
Adjusting Or Making Repairs To Your Water Pump:
•
Uncouple the FLEX™ Water Pump from
the FLEX™ Power Base before making any
major adjustments or repairs.
Excessively high speeds increase the risk of injury
and damage to water pump. Excessively low speeds
impose a heavy load.
•
DO NOT tamper with governor spring,
links or other parts to increase engine
speed. Water pump supplies correct
rated pressure and flow when running at
governed speed.
•
DO NOT modify water pump in any way.
Note:
Improper treatment of water pump
could damage it and shorten its life.
•
If you have questions about intended
use, ask dealer or contact qualified
service center.
•
NEVER operate units with broken or
missing parts, or without protective
housing or covers.
4
S
2 — i
ection
mportant
•
DO NOT by-pass any safety device on this
machine.
•
DO NOT tamper with governed speed.
•
Before starting water pump in cold
weather, check all parts of the equipment
to be sure ice has not formed there.
•
NEVER move machine by pulling on
hoses. Use handle provided on unit.
•
This equipment is designed to be used
with Troy-Bilt authorized parts ONLY.
•
If equipment is used with parts that
DO NOT comply with minimum
specifications, user assumes all risks and
liabilities.
General Operation
1.
Read this Operator's Manual completely
before starting the machine. Study the
controls and learn the proper sequence of
operation. Retain Operator's Manual in a
safe place for future reference.
2.
Always perform a pre-operating inspection
before each use.
3.
Do not allow anyone to operate or maintain
this machine who has not read the manual.
4.
Do not allow anyone under the age of 16 to
operate the water pump.
5.
Always have your feet and hands clear of the
controls when starting the engine.
6.
Do not remove any shields, guards, decals
or safety devices. If a shield, guard, decal
or safety device is damaged or does
not function, repair or replace it before
operating the machine.
7.
Always wear safety glasses, long pants and
safety shoes when operating or maintaining
this unit. Do not wear loose-fitting clothing.
8.
Never run the engine indoors without
adequate ventilation. Exhaust fumes are
deadly.
9.
To avoid serious burns, do not touch the
engine or muffler while the engine is
running or until it has cooled for at least 30
minutes after it has been shut off.
10.
If water is trapped in the pump during
operation it may turn to steam. Trapped
steam can lead to an explosion and burns.
Never run the pump with the outlet closed
or obstructed.
11.
Do not allow children and pets to enter
the working area as this may increase the
chance of their getting burned by hot
surfaces of the operating parts.
12.
Always check the area and remove debris
and other objects prior to using the water
pump.
13.
Always disconnect the spark plug wire
to prevent the engine from accidentally
starting before performing any
maintenance on this machine.
S
o
p
afe
peration
racticeS
14.
Keep the machine and especially the
engine/pump area clean and free of grease,
grass and leaves to reduce the potential for
over heating and fire.
15.
Do not allow pump or any system
component to freeze. to do so will void
warranty.
16.
Periodically inspect pump and system
components.
General Requirements
1.
Never run an engine indoors or in a poorly
ventilated area. Engine exhaust contains
carbon monoxide, an odorless, and deadly
gas.
2.
Before cleaning, repairing, or inspecting,
make certain all moving parts have stopped.
Disconnect the spark plug wire and ground
against the engine to prevent unintended
starting.
3.
Keep all nuts, bolts, and screws tight to
be sure the equipment is in safe working
condition.
4.
Never attempt to make adjustments or
repairs to the machine while the engine is
running.
5.
For safety protection, frequently check
components and replace immediately
with original equipment manufacturer's
(O.E.M.) parts only, listed in this manual.
"Use of parts which do not meet the original
equipment specifications may lead to
improper performance and compromise
safety!"
6.
Do not change the engine governor settings
or over-speed the engine. The governor
controls the maximum safe operating speed
of the engine.
7.
Maintain or replace safety and instruction
labels, as necessary.
8.
Observe proper disposal laws and
regulations for gas, oil, etc. to protect the
environment.
Publicidad
Tabla de contenido
Solución de problemas
