Hilti TE 500-AVR Manual De Instrucciones Original página 19

Trouble or fault
The chisel cannot
be released from the
chuck.
The service indicator
blinks.
The service indicator
lights.
9 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
▶ Disposal of electric tools or appliances together with household
waste is not permissible.
10 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
Printed: 09.08.2017 | Doc-Nr: PUB / 5367058 / 000 / 01
Possible cause
The chuck is not pulled
back fully.
A fault has occurred in
the tool.
The carbon brushes are
worn.
The tool is faulty or ser-
vicing is due.
Action to be taken
▶ Pull the chuck back
as far as it will go and
remove the insert tool.
▶ Have the product
repaired by Hilti
Service.
▶ Have checked by a
trained electrical spe-
cialist and replaced if
necessary.
▶ Have the product
repaired only by Hilti
Service.
English 13