Preparations At The Workplace; Connecting The Detachable Supply Cord - Hilti TE 500-AVR Manual De Instrucciones Original

Recommended minimum conductor cross-section and maximum
power-cord length for 120V supply voltage
Cord
Conductor cross-section
Conductor cross-section
Cord length
Cord length
5 Operation

5.1 Preparations at the workplace

CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool
or before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1.1 Fitting the side handle
CAUTION
Risk of injury! Loss of control over the breaker.
▶ Check that the side handle is fitted correctly and tightened securely.
1. Slide the side handle clamping band over the chuck from the front and
into the recess provided.
2. Bring the side handle into the desired position.
3. Secure the side handle by turning the knob until the clamping band is
tight.

5.1.2 Connecting the detachable supply cord

CAUTION
Risk of injury! Due to leakage current as a result of dirty contacts.
▶ Connect the detachable electric connector to the electric tool only
when it is clean and dry and when the supply cord is unplugged from
the power outlet.
1. Push the keyed, detachable electric plug connector into the socket as far
as it will go, until it is heard to engage.
2. Plug the supply cord into the power outlet.
8 English
Printed: 09.08.2017 | Doc-Nr: PUB / 5367058 / 000 / 01
AWG 16 AWG 14
1,31 2,08
mm² mm²
2,58 4,11
kcmil kcmil
25 m 30 m
75 ft 100 ft
2
AWG 12 AWG 10
3,31 5,26
mm² mm²
6,53 10,4
kcmil kcmil
50 m 100 m
150 ft 250 ft