Want More - Motorola Connect & go Manual Del Usuario

Want more?

we're here to help
Troubleshooting
A few frequently asked questions—with answers of
course. Find more at www.motorola.com/support.
My remote won't go into pairing mode. Make sure
that any previously paired devices are turned off. Also,
the status light should show steady blue (pairing
mode)—if not, turn off the remote, then turn back on
while holding the Volume Up (+) and
until the light turns blue.
My device doesn't find my remote when searching.
Make sure the status light shows steady blue when your
device is searching for devices. If not, turn off the
remote, then turn back on while holding the Volume Up
(+) and
My remote worked before, but now it's not working.
Make sure your device is on and its Bluetooth feature is
on. You may need to pair your device and remote again
(see "Connect & go" on page 3).
The touchpad cursor is slow on the screen. You can
adjust the speed as follows:
• For Android 3.2 tablet devices, touch
Language&Input
>
Pointer Speed
>
buttons until the light turns blue.
Mouse
>
.
Settings
Trackpad Settings
and
Want more?
buttons
7