Vissani QR272S Manual Del Usario página 14

Installation (continued)
SECURING THE RANGE HOOD TO THE BRACKETS
NOTE:
The following procedure applies to both frame or frameless cabinet
bracket installations.
- There are 2 pairs of recessed slots in the front and rear
of the range hood .
- Rear (R) slots can be used to hold the range hood
temporarily in place while making final adjustments to
vent and electrical connections .
- Front (F) slots are used to hold the range hood in place to
permanently secure it to the cabinet .
- Temporarily hang the hood on the rear (R) brackets .
While holding the hood check the electrical and duct
connections .
- Once the integrity of the connections has been confirmed,
remove and hang the range hood in its final location
using the front (F) slots .
QR272S / QR272BS
R
F
A
14
F
Fig . 19
Fig . 20
R
B