Viewing The Camera On A Tv Or Vcr; Viewing And Recording On A Tv Or Vcr; Tips & Suggestions - Swann PRO Serie Manual Del Usuario

Viewing the Camera on a TV or VCR

Viewing the PRO-560/580 on a TV
After connecting the PRO-560/580 Camera directly to your TV and powering it
on as described on page 4, tune the TV to the correct input channel.
On your TV's remote control, the input button is usually labelled as Input, Source,
A/V, Channel 0, AUX etc.*
Viewing and Recording the PRO-560/580 on a VCR
Connect the PRO-560/580 into an available input channel on your VCR in the
same manner as the TV connection listed on page 4. Turn on your VCR and TV
as if you were about to play a VCR tape.
On your VCR's remote control, fi nd the input button with is usually labelled as L1,
L2, Input, Source, A/V, Channel, 0, AUX etc.* Insert a tape and push record to
record the camera.
*Consult the TV or VCR instruction manual for details about changing input
channels.
Installation Tips & Tricks
Before doing a permanent installation, connect the camera to your TV or VCR
using this Quick Start Guide to ensure all components in the pack are working
correctly.
If you have trouble with connecting the product contact our Technical Support
team. Contact details are on the back cover page of this guide.
Install cameras high enough or out of reach to avoid tampering.
Place Security Stickers in a visible location to alert potential thieves they are being
monitored.
Purchase a Swann DVR to record multiple cameras simultaneously and easily moni-
tor your property.
Place cameras in high traffi c areas such as doorways to maximise security.
Use only the included Power Supply and do not modify or cut wires.
6 6 6 6
CÁMARA DE 4 paquetes de
3B
Conecte los cables de extensión de
Toma de CC a una de las cuatro
tomas de corriente en el divisor de potencia.
A continuación, conecte el único fin de la
separador de alimentación a la clavija de cc
en el adaptador de corriente.
Conecte la toma DC de los
3A
cables de extensión al enchufe
DC en el adaptador de corriente.
2B. Conectando su DVR Existente
Conecte el enchufe BNC de los cables de
2
extensión a la toma BNC (CH1, CH2, CH3
o CH4) en la parte posterior del DVR.
Conecte el
4
adaptador de
corriente de la
cámara a la
toma de la
pared.
19 19