Installing The Camera - Swann SWIFI-TRACKERCAM Guia De Inicio Rapido

1
Insert a microSD card (up to 128GB, minimum Class 10 or higher recommended) into the microSD
card slot on the camera as shown. Skip this step if a microSD card has been pre-installed. The
camera requires a microSD card for streaming video, saving recorded events, and firmware updates.
2
Insert the micro USB plug of the supplied power adapter into the micro USB port on the back of
the camera.
3
Connect the power adapter to a power outlet. Make sure the camera is within range of the Wi-Fi
network to which you want to connect.
1

INSTALLING THE CAMERA

2
3
EN
3