Installation Conditions - Mestra 100191 Manual Del Usuario

RESPONSABILITY LIMITATION
1. Manufacturer shall
responsibility if any malfunction, damage or
accident if it is caused by the improper
renewal, modification, maintenance, or repair
as not being conducted by the dealer
designated by us.
2. Manufacturer shall
responsibility if any malfunction, damage or
accident if it is caused by the use of the
product not provided by us.
3. Manufacturer shall
responsibility if any malfunction, damage or
accident if it is caused by the improper
removal, modification, maintenance or repair
as not use the parts provided by us.
4. Manufacturer shall
responsibility if any malfunction, damage or
accident if it is caused by the improper
operation as not in compliance with the
manual.
5. Manufacturer shall
responsibility if any malfunction, damage or
accident if it is caused by the ambient
environment as not in compliance with the
power, installation environment and using
conditions specified on this manual.
6. Manufacturer shall
responsibility if any malfunction, damage or
accident if it is caused by fire disaster,
earthquake, flood or struck by lightning.

INSTALLATION CONDITIONS

1. Condiciones de instalación y uso:
▪ Use inside the house.
▪ Use at the ambient temperature between 5 -
40º C.
▪ Use a 230 V, 50/60 Hz power source.
2. Installation:
▪
Install on cabinet or table strong and
the
firm with flan surface, thw strength of which is
sufficient to support.
▪ Never install near inflamable substances.
▪ Keep the device away from water or sources
of moisture that can cause a shock or cause
mechanical problems.
▪ Do not place any objects on top of the top
cover or the control panel to prevent damage
or spills.
Before / after transport
3.
▪ Before installation, remove the 2 bolts
fixed at
the bottom of the machine (Fig. 1)
and place them in the holes at the back of
the unit for future use.
▪ If the mixer
is out of order and needs to
be sent for repair or delivered to some
not assume any
not assume any
not assume any
not assume any
not assume any
not assume any
:
far place, please fasten by the fixing
bolts attached
otherwise it could possibly cause
further malfunction or damage.
! NOTE
There is a new design of rear cover
the bottom screws can fix
Power
4.
▪ Connect
the power cable to the outlet on
the reverse side of the machine
▪
Connect to a 230 V, 50/60 Hz grounded
power source
.
! NOTE
Spare fuse inside for replacement.
Specifications: 10 A / 250 V
OPERATION
Max. mix:
Water + alginate
English
in the delivery,
Fig. 1
where
.
.
Fig. 2
.
= 80 g
11