Cleaning - nasiboo pro Manual Del Usuario

Nosiboo Pro User Manual USA V01-1_Nosiboo Pro_User Manual_USA_V01.1 23/11/16 12:23 Page 14

6. Cleaning

1. Remove the connecting tube and the nose tip, then take apart
the Colibri housing.
2. Wash the collared tube, the nose tip, and the Colibri housing in
lukewarm water and dishwashing detergent and let them dry.
3. Clean the housing with a dry, soft cloth; do not use any liquids,
detergents or chemicals.
4. Wipe the connecting tube with a cloth if necessary.
User manual DMR-01/A05/V01 2016-12-01
* *
Switch off the device and unplug the unit
from the electrical outlet when assembling,
disassembling and cleaning its parts.
Don't wash the housing or the power cord in
water or any other liquid.
Don't handle the power cord with wet hands.
Don't wash the connecting tube.
Thoroughly clean the Colibri head after use.
Make sure that all parts are dried thoroughly
before the next use.
If liquid gets into the connecting tube due to
improper use, make sure that it is completely
dry before using it again.
Do not disassemble the housing.
To avoid damage, make sure the tube
connector is not exposed to heat.
Nosiboo Pro Nasal Aspirator
* *
Page: 14/60