Using The Boost Function - Nbels VINSM3 Manual De Instrucciones

No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off.
2. Turn the cooking zone off by scrolling down to"0" or touching"-" and"+"
control. Make sure the display shows"0"
3. Turn the whole cooktop off by touching the
ON/OFF control.
4. Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate
that is still hot.

Using the Boost function

Active the boost function
1. Touching the heating zone selection control.
2. Touching the boost control
reach Max.
, the zone indicator show "P" and the power
12