Operation; Maintenance - Brinly PRC-241 BH Manual Del Propietário

================================================================================================

OPERATION

CAUTION! Do not overload your Tractor / Rider.
Roller fully loaded with water weighs:
PRC-241 BH
PRT-361 BH
PRT-361S BH
PRT-481S BH
• Refer to tractor manual to determine proper towing capacity
of your Tractor / Rider.
• Fill the roller with amount of water
recommended for your tractor /
rider. Screw in the plug (plug has
pipe threads and may not screw all
the way in) and tighten securely.
• The plug is a tapered pipe thread
joint, allowing the threads to act
as a sealant and prevent the drum
contents from leaking out.
NOTE: By design, a tapered pipe
thread will require more torque as it
secures, because the plug threads
and the mating hole threads are
locking tighter and tighter together.
With this type of joint, a gasket,
pipe dope, or plumbers tape is not
required.
• For longest life, drain the roller, leave the plug out, and
if possible, hang the roller when not in use to prevent
possibility of developing a flat spot.
• If a flat spot develops on the roller during storage, ensure
roller is empty then leave out in the sun to warm and roll
around to reduce flat area.
• Please note that sand may be used in place of water with
no risk of freezing.
• Ground condition is vital to good leveling. Soil should be
moist, but not muddy.
• Refer to your Tractor or Riding Mower Owner's manual for
proper towing capacity and safe operation of your towing
equipment. Towing / Stopping distances will be greatly
affected by added weight of roller.
English Manual
OPERATION AND MAINTENANCE
= 270 lbs
= 690 lbs
= 390 lbs
= 485 lbs

MAINTENANCE

• The key to years of trouble-free
service is to keep your Lawn Roller
clean and dry.
• Occasionally check all moving parts for free movement and,
if necessary, lubricate with oil.
• Should rust develop, sand lightly and then paint area with
enamel.
• Periodically check all fasteners for tightness.
TRACTOR / RIDING MOWER SPEED
Rollers yield the best results when ground
conditions are correct, and equipment is
operating at less than 3 mph.
CALIBRATING YOUR TRACTOR TO 3 MPH:
Measure a distance of 20 feet on a flat, level
surface. Adjust tractor throttle and select a gear
to cover this distance in 4.5 seconds.
SERVICE
QUALITY CONTINUES
WITH QUALITY SERVICE
If you have installation questions, are missing parts or need
replacement parts, don't go back to the store!
Please find your product serial number and model number,
then contact our Customer Service department:
In North America and Canada call
Toll-Free: 877-728-8224
Chat online: www.brinly.com
Email: customerservice@brinly.com
9 L-1681BH-F