Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS MANUAL
Mini digital timer
C-LOGIC 310-PT
SKU: CLOGIC310PT127VCBINT
ENGLISH
A. FUNCTIONS
1. The Mini Digital Timer (hereinafter refer as "Timer") can preset specific on/off time of your
home electrical appliances, e.g. coffee machine, lamps. It is ideal for energy saving and home
security.
2. With large LCD shows program setting status and real time.
3. With maximum 140 on/off programs per week.
B. DIAGRAM & DESCRIPTIONS
See Image 1 for general overview of the mini digital timer.
No.
Button
Functions
description
1
LCD Display
Shows time and program setting.
2
Week
• In program setting mode, press to set week pattern
• In real time setting, press CLOCK + WEEK to set date of week
3
RST/RCL
Cancel or resume the power ON/OFF set time under Program
setting
4
R
Press and hold to reset all the programs permanently
5
CLOCK
Return to real time display when in program setting
Press CLOCK + WEEK/HOUR/WEEK, to set real time
6
ON/OFF
Change the setting mode to ON, AUTO or OFF.
When press the button each time, the horizontal line in the LCD
moves to ON←→AUTO←→OFF which were silk printed on the
Timer
7
PROGRAM
Press to enter program setting
8
HOUR
• In program setting mode, press to set hour
• In real time setting, press CLOCK + HOUR to set hour
9
MINUTE
• In program setting mode, press to set minute
• In real time setting, press CLOCK + MINUTE to set minute
C. TIME DISPLAY
There are two different kinds of time displays:
1. 12-hour display: the digital number is from 11:59 to 12:00 with AM or PM shown on the LCD
2. 24-hour display: the digital number is from 00:00 to 23:59, no AM or PM is shown on the
LCD
3. To change from 12-hour to 24-hour display, or vice versa, press CLOCK Button and hold
it till LCD shows 12H or 24H, press HOUR to set chose the desired display mode. Press
CLOCK to return to real time display.
D. REAL TIME SETTING
1. Press and hold the CLOCK button, then press WEEK button, following sequence by
pressing the WEEK button each time.
→Mo→Tu→We→Th→Fr→Sa→Su
2. Press and hold the CLOCK button, then press HOUR button. Number of hours increase
one by one slowly by pressing the HOUR button each time. If press and hold CLOCK +
HOUR buttons at the same time, number of hours moves quickly.
3. Release the HOUR button when the desired hour shown on the LCD
4. Press and hold the CLOCK button, then press MINUTE button. Number of minutes in-
crease one by one slowly by pressing the MINUTE button each time. If press and hold
CLOCK +MINUTE buttons at the same time, number of minutes moves quickly.
5. Release the MINUTE button when the desired minutes shown on the LCD
Noted:
LCD must be in real time display to start week and time setting for actual time. If LCD is in
program setting display, press CLOCK Button once to return to real time display.
The time display format is in 24hours. (It has 12 to 24 hrs conversion function).
E. PROGRAM SETTING
1. When the LCD is in real time display, press PROGRAM button once to start setting. "1ON"
will be shown on the lower left corner of the LCD:
1.1 "1" indicates the program group's number (program group is from 1 to 20)
1.2 "ON" indicates power on time.
1.3 "OFF" indicates power off time
2. To chose the program group and on/off status, press PROGRAM button to increase the
group number, sequence as follows:
→1ON→1OFF→2ON→2OFF→.......................................20ON→20OFF→
3. After choosing the program group, then set the week and time. Press WEEK Button to
chose week pattern, the LCD will display the following in sequence by pressing WEEK eve-
ry time:
3.1 MO→TU→WE→TH→FR→SA→SU
3.2 MO WE FR
3.3 TU TH SA
3.4 SA SU
3.5 MO TU WE
3.6 TH FR SA
3.7 MO TU WE TH FR and
3.8 MO TU WE TH FR SA
3.9 MO TU WE TH FR SA SU
4. Then, set the on/off time for the preset pro-
gram.
5. Press HOUR to set number of hours
6. Press MINUTE to set minutes
7. To set other program group's on/off time, re-
peat procedures mentioned from #2 to #7.
Noted:
(a). To change the power ON/OFF time of pre-
set program, repeat procedures #2 to #7 as mentioned in Part D and input the new data to
replace the old setting. Or press RST/RCL once to cancel the power ON/OFF time setting,
or press the same button again to resume the previous setting.
- The set time can be canceled or resumed by pressing"RST/RCL"button, which is ef-
fective only in time setting
- When the set time is canceled, the given tacit time 12:00 AM (12 hours) or 00:00 (24
EN
hours) can be displayed by pressing"Hour","Min"button.
- When the set time is canceled, it can be resumed by pressing"RST/RCL"button.
- When the power ON/OFF time is set, it becomes effective at once
(b). After program setting, press CLOCK Button to return to clock display at once, or it will be
returned automatically after 15 seconds without pressing any other buttons.
F. OVERRIDE/RESUME PRESET PROGRAM
Press ON/OFF Button each time can override/resume the preset program, LCD changes the
display in the following sequence:
1.ON: override the preset program and appliance remains on at all time
2.AUTO: resume the preset program, appliance will be turned on and off automatically
according to the preset time
3.OFF: override the preset program and appliance remains off at all time
G. CONNECTIONS
1. Preset your desired On/Off programs on the Timer as mentioned above.
2. Switch off your electrical appliance.
3. Connect your appliance's power cord to the Timer's socket, then connect the Timer to the
AC socket to get power.
4. Switch on your appliance.
5. Appliance will then be turned on/off according to your preset programs unless manual
override pressed.
H. SAFETY PRECAUTION
1. The Timer is using a rechargeable battery. To power the unit back on, press the reset but-
ton while plugged into outlet.
2. Risk of electric shock:
- Keep away from children
- Unplug timer before cleaning and program setting
- Fully insert plug
- Do not use in wet locations, the timer is for indoor use only
3. Risk of fire:
- Do not use to control appliances that contain heating elements (cooking appliances, heat-
ers, irons, etc.)
- Do not exceed electrical rating
4. Specifications
• 125V~ 50-60Hz, 15A for Resistive
• 125V~ 50-60Hz, 10A for Tungsten
• Time Setting Interval: 1 Minute
WARNING:
Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
"NOTE: This equipment has been tested and found to comply with the limits for Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio or television re-
ception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.-Increase the separation between the equipment
and the receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help."
FULL MANUAL DOWNLOAD
You can download the complete manual at the URL
https://clogic-intl.com/clogic-310-PT
MANUFACTURER: MGL International
APAC: MGL GLOBAL SOLUTIONS LTD
Taipei, Taiwan.
info.apac@mgl-intl.com
EMEA: MGL EUMAN S.L.
Asturias, Spain.
info.emea@mgl-intl.com
AMERICAS: MGL AMERICA, LLC.
US East Coast: Charlotte, North Carolina.
US West Coast: Brea, California.
info.na@mgl-intl.com
www.mgl-intl.com
Image 1
Publicidad
