UK
12. DVB-T / T2HD SETTINGS
In this menu you can carry out the automatic DVB-T / T2HD search or manual
tuning.
1. Press [INPUT] to enter the input sources menu.
2. Use the buttons [ ▲ ▼ ] to navigate in the menu and select the menu item
»DVB-T«.
3. Press [OK] to confirm the selection and switch to DVB-T mode.
4. Select the installation country and select between »Automatic search« and
»Manual DVB search« to start the automatic search or the manual search.
5. When the search is complete the first channel found starts up.
Country:
Automatic search:
Manual DTV search:
The following settings are available for the menu item
»Manual DTV search«.
Channel:
Frequency (MHz):
Bandwidth (MHz):
Start:
NOTE | Digital manual tuning is recommended for experienced users
only.
To use active 5 V antennas, switch menu item »5 V antenna voltage«
in the »Configuration« menu to »On«.
Smart TV CB 19 iTV, CB 22 iTV | 49893 / 49894
Select the installation country.
Starts the automatic search. Confirm the
following prompt whether to start the search by
pressing the [OK] button. Press [EXIT ] if you do
not with to start the search.
Opens the menu for digital manual tuning.
Select the desired channel.
The frequency is automatically adapted.
Select the desired frequency.
The channel is automatically adapted.
Adjust the bandwidth.
Starts the manual search.
58