Product Setup - D-Link Sharecenter DNS-315 Guía De Instalación Rápida

PrODUCT
SETUP
QUIcK InStaLLatIOn
If you have purchased a dns-315-XXX, please skip the steps below as your device already
includes a hard drive pre-installed. please in this case proceed directly to step 9
DnS-315
1. use a screwdriver (not supplied in box) to unscrew the two screws
at the bottom of the dns-315.
2. slide the top cover away from you until it unhooks from the base
(note the direction of the d-link logo in the image to verify the
direction).
3. unhook and open the cover from its base.
4. keeping the dns-315 in the upright position, insert a compatible
3.5" hard drive into the drive bay of the device. (ensure the sata
connector is aligned with the sata socket at the base of the unit
otherwise the dns-315 will not power on correctly).
5. use all six screws supplied to secure the hard drive to the base unit.
3