General Safety - Campbell Hausfeld TL053700AV Manual De Instrucciones

GENERAL SAFETY INSTRUCTIONS (CONTINUED)

General Safety

This product is part of a high pressure system and the following safety
precautions must be followed at all times along with any other existing safety
rules.
1.
MANUAL 2.
3.
4.
5.
6.
7.
8.
9.
10. Never point an air tool at oneself or any other person. Serious injury
11. Check air hoses for weak or worn condition before each use. Make sure
12. Keep all nuts, bolts and screws tight and ensure equipment is in safe
13. Do not put hands near or under moving parts.
14. Always secure work.
cause injury to hands and arms. Stop using any tool if discomfort, numbness,
tingling or pain occur and consult a physician.
from heat, oil and sharp edges. Replace any hose that is damaged, weak or
worn.
Read all manuals included with this product carefully. Be thoroughly
familiar with the controls and the proper use of the equipment.
Only persons well acquainted with these rules of safe operation should
be allowed to use the air tool.
Do not exceed any pressure rating of any component in the system.
Disconnect air tool from air supply before changing tools or attach-
ments, servicing and during non-operation.
Do not wear loose fitting clothing, scarves, neck ties or jewelry when
operating any tool. Loose clothing or jewelry may become caught in
moving parts and result in serious personal injury.
Do not depress trigger when connecting the air supply hose.
Always use attachments designed for use with air powered tools. Do not
use damaged or worn attachments.
Never trigger tool when not applied to a work object. Attachments must
be securely attached. Loose attachments can cause serious injury.
Protect air lines from damage or puncture.
could occur.
all connections are secure.
working condition.
Do not exceed the maximum operating pressure of
the air tool (90 psi). This can reduce the life of the
tool.
Safety glasses must be worn during operation.
Release all pressure from the system before
attempting to install, service, relocate or perform
any maintenance.
Excessive exposure to vibration, working in
awkward positions and repetitive work motions can
Never carry a tool by the hose or pull the hose to
move the tool or a compressor. Keep hoses away
6