Compatibility; Clearance - Werner R430006 Instrucciones Para El Usuario

6. Verify that all labels are intact, in place and legible.
If abnormalities are found in any of these areas then the
competent person must be consulted to determine if that
item is safe for continued use or if it should be removed from
service.
b. Compatibility
Verify compatibility of any subsystems being used. Werner Co.
products connected to Werner Co. products should be compatible.
Connection to other products must be verifi ed for compatibility to
ensure there is no accidental detachment from side-loading, rollout,
non-standard closures, etc.
INAPPROPRIATE CONNECTIONS
NO!
NO!
c. Clearance
Verify that adequate clearance exists below the work area and
there are no objects or obstructions below the work area that the
user could contact in the case of a fall. See section III.b for more
details.
Page 6
NO! NO!
NO! NO!
NO!
NO!