Troubleshooting Guide - Hurricane HMH 200 Manual De Instrucciones Original

Anleitung_HMH_200_SPK7:_

10. Troubleshooting guide

The machine does not a) No power at the plug
work b) Machine is switched off
c) Overload switch has tripped
d) Ejector chute is blocked
e) Loading funnel is not secure on the
motor housing
Shredding performance a) Blades worn
unsatisfactory
Shredding performance a) Blades worn
falls in quality
05.11.2009 9:22 Uhr Seite 15
a) Check the power cable and fuse
b) Switch on machine
c) Press control on overload switch
b) Clean ejector chute
e) Clean interior and tighten safety
screw
a) Turn, sharpen or replace blades
a) Turn, sharpen or replace blades
GB
15