Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
HOW IT WORKS
Water from the water tank flows into the reservoir. A wicking filter absorbs the water from
the reservoir and becomes saturated. Dry air from the room is pulled into the humidifier
through the intake grills. Moisture evaporates off the saturated wicking filter and is pushed
into the room with the help of a fan.
Your humidifier is made up of these parts:
Motor Housing/
Upper Enclosure
Water Tank
Fill Cap
O-Ring Gasket
Filter
Base
2
Outside
Inside
SETTING UP YOUR HUMIDIFIER AND PLACEMENT
Remove from box. Remove packaging material. Remove and set aside this owner's
manual. Recycle box and packaging materials or save box for end of season storage
Select a firm, level location at least 6" (15cm) from
any walls and furniture for proper airflow. Place the
humidifier on a water resistant surface, as water can
damage furniture and some flooring.
Kaz USA, Inc. will not accept responsibility for property
damage caused by water spillage.
OPERATION
Remove tank and fill.
Lift off upper
enclosure.
Fill tank with water and
Make sure unit is off.
replace filled tank.
FAN SPEEDS
HIGH: For fast humidifying
MED: For everyday moisture control
LOW: For quiet operation (ideal for nighttime use)
Remove filter and soak
Replace wet filter into
in cool water.
unit and reassemble.
Plug into polarized 120V
Set fan speed.
outlet.
3
Publicidad
Tabla de contenido
