Instruction Manual
HONEYWELL TOP FILL
COOL MOISTURE HUMIDIFIER
MODEL HEV680 SERIES
REPLACEMENT FILTER: HONEYWELL HC-14 SERIES FILTER E
GETTING TO KNOW
YOUR COOL MOISTURE
EVAPORATIVE HUMIDIFIER
Invisible moisture
• Evaporative humidification
means you will NOT see
the moisture output.
• With evaporative humidification, a fan pulls
dry air from the room through the saturated
wicking filter. Moisture from the wicking
filter evaporates and is pushed into the
room with the help of the fan.
• Evaporative humidification adjusts moisture
output to the amount of moisture the air can hold. The drier (less humid) the air in the room,
the more moisture the humidifier will add to the air. An evaporative humidifier cannot add
more moisture to the room than the air can hold. The amount of moisture the air can hold
depends on many factors including relative humidity level, temperature and size of room.
Filter
• A wicking filter is required for this
unit to operate (one included)
• The wicking filter will help to capture minerals
from your water and will help to prevent white
dust (calcium deposits from hard water)
• If you have hard water, you will need to
replace your filter more frequently
• See "Caring for your Filter" section for tips
on prolonging the life of your wicking filter
Visit www.honeywellcomfort.com (in US) or www.honeywellcomfort.ca (in Canada)
Call 800-477-0457 for questions and information about this humidifier
Humidity Level
• The ideal indoor humidity level is 40-60%
• Use a Honeywell humidity monitor
(HHM10 or H10C) to check your indoor
humidity level (not included)