Tomahawk IC7 Manual De Instrucciones página 10

HOW TO ASSEMBLE THE
5.
OPEN THE FLIP LEVER FOR THE HORIZONTAL
ADJUSTMENT AND SLIDE THE HANDLEBARS
TO ITS MOST FORWARD POSITION.
ASSEMBLE THE BOTTOM END CAP.
8.
CHECK THE VERTICAL ADJUSTMENT, WITH THE FLIP LEVER OPENED, FOR EASE OF MOTION WHEN ADJUSTING.
CHECK THE CLAMPING FORCE OF THE VERTICAL ADJUSTMENT WITH THE FLIP LEVER CLOSED. MAKE SURE THE
VERTICAL ADJUSTMENT PERFORMS SUFFICIENTLY.
ADJUST IF REQUIRED REFERING TO SERVICE GUIDELINES ON AVAILABLE ON MANUFACTURER'S SERVICE WEBSITE
OR CONTACT YOUR LOCAL DISTRIBUTOR.
Version 3.0 2015 IC-TKIC7B-03 Copyright by Indoor Cycling Group GmbH 2015 | www.indoorcycling.com
INDOOR CYCLE
3MM
2
HAND TIGHT
PEOPLE
6.
7.
CHECK THE HORIZONTAL ADJUSTMENT OF THE
HANDLEBARS, WITH THE FLIP LEVER OPENED, FOR
EASE OF MOTION WHEN ADJUSTING.
CHECK THE CLAMPING FORCE OF THE HORIZONTAL
ADJUSTMENT WITH THE FLIP LEVER CLOSED.
MAKE SURE THE HORIZONTAL ADJUSTMENT
PERFORMS SUFFICIENTLY.
ADJUST IF REQUIRED REFERING TO SERVICE
GUIDELINES AVAILABLE ON MANUFACTURER'S
SERVICE WEBSITE OR CONTACT YOUR
LOCAL DISTRIBUTOR.
9.