Integrated head tube light:
Some bikes (Prime-E+) have additional daylight integrated in head tube. Lighting system for these bikes
is slightly different.
∙
Under the fender front light there is a switch (A). This switches between 'auto' and 'manual' lighting.
∙
When the switch is in 'auto' mode, the light sensor (B) on top of the fender front light (C) switches
between head tube light (D) or front fender light (C), depending on the amount of ambient daylight.
The system requires 5 seconds to adapt from head tube light to fender light, 20 seconds the other
way around.
∙
When the switch is in 'manual' mode, the light button on the handle bar will switch the front fender
light only. The head tube light can't be used in this mode.
B
A
Battery indications
Battery level is indicated via EnergyPak charge indicators (J). For Charge and EVO displays, this is
visible via indicator bar and by digits. For RideControl ONE, battery level is indicated via LEDs on the
right side of the button.
For RideControl ONE only:
∙
When battery power is less than 10%, bottom LED glows orange continuously.
∙
When battery power is less than 3%, or when the bike is in 'OFF' mode', bottom LED blinks orange.
Assist will shut down, The light system is still functional.
C
D
17