Advanced Features - Slendertone Abs 5 Manual De Instrucciones

Ocultar thumbs Ver también para Abs 5:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A
DVANCED FEATURES
Intensity Keylock Function
If you find a comfortable intensity level,
press the upper and lower halves of the
LEFT intensity button at the same time to
lock that intensity. This will also lock the
program button. This function is only active
during the session in which it was activated.
Deactivate the keylock by performing the
same action again.
Mute Function
If you want to switch off your controller's
sound effects, press the Information button
and the Program button at the same time.
The mute function remains active indefinitely
unless manually changed. Deactivate the
mute function by performing the same
action again.
P
AD CONTACT INDICATOR
If the Pad Contact symbol (
there is a problem with the connection between the GelPads
and your skin, or between the GelPads and the belt. The Pad
Contact symbol always appears in conjunction with the left
or right arrow on the display screen as follows: If the left arrow
appears, there is a problem with the left GelPad. If the right arrow
appears there is a problem with the right GelPad and if both
arrows appear, there is a problem with either the middle GelPad
or all three GelPads.
www.slendertone.com
English
) has appeared on the display,
T
-
ROUBLE
SHOOTING CHECKLIST
If you have problems getting your
through the following checklist:
When did you last change your GelPads?
Pads need to be changed every 20-30 sessions. Call our
support line below to place an order.
Have you removed all the plastic covers from both the grid sides
and black sides of the GelPads?
Remember to keep one set of covers to protect the black side
of the GelPads during storage.
Are the GelPads covering the metal studs?
Double-check the GelPads on your belt to ensure that the grid
side of each GelPad is fully covering the metal studs.
Are the batteries inserted correctly?
The batteries must be inserted in a specific way for the controller
to work (see page 6). If you find any corrosion within the battery
compartment call Customer Care below for assistance.
Is your controller inserted into the holder properly?
Remove the controller and wipe the holster pin with a dry cloth.
Then re-insert the controller, pushing it until it clicks into place.
Are the GelPads and belt positioned correctly?
Ensure the large, center GelPad is directly over your navel and
that the smaller GelPads are directly between your hip-bones
and ribs.
Still having trouble? Call us toll free on
1-800-551-2443
See www.slendertone.com for GelPads & Accessories
5 to work, you should go
SLENDERTONE ABS
11

Publicidad

Tabla de contenido
loading

Tabla de contenido