Connecting A Vcr For Recording - HP LC3260N Guía De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

sa6ldtv.book Page 14 Tuesday, February 21, 2006 12:35 PM
Connecting a component device
Cables are sold separately.
1
Connect the component cable (Y, Pb, Pr) to the
Component-1 (Input 3) or Component-2 (Input 4)
connectors (G, BL, R) on the TV.
2
Connect the component audio cable to the left
and right Component1-Audio (Input 3) or
Component2-Audio (Input 4) connectors on
the TV.
3
Connect the cables to the device.
4
Turn on the device, and start play.
5
Connect power to the TV; see "Connecting power
to the TV" on page 15.
6
Turn on the TV; see "Turning the TV On and Off
(Standby)" on page 17.
Connecting an S-video or Video device
A VCR, game console, camcorder, or some other
audiovisual equipment can be connected using S-video
or Video (composite) (Input 1 or Input 2) connectors.
Cables are sold separately.
Both AV-S/Video and AV-Video connectors
share the audio connectors in the input
connector set. If cables are connected to
both video connectors in a set, the S/Video
connector has priority over the Video
connector. Connect only one video input.
14
HP LCD HDTV User's Guide
!
1
Connect the video equipment to the TV (Input 1 or
Input 2) connectors:
For a VCR, DVR, or other device that has an
S-video connector, use an S-video cable with
the AV-S/Video connector set.
Or
For a VCR, DVR, or other device that has a
composite connector, use a composite cable
with the AV-Video connector set.
2
Connect the audio cable connectors to the left and
right audio connectors for the connector set.
3
Connect the cables to the device.
4
Turn on the device, and start play.
5
Connect power to the TV; see "Connecting power
to the TV" on page 15.
6
Turn on the TV; see "Turning the TV On and Off
(Standby)" on page 17.

Connecting a VCR for recording

The TV does not output a signal for recording.
Connect a VCR or other device for recording to the
signal source (antenna or cable) and then connect
the device to the Ant/Cable connector on the TV.
(See "Connecting the cable TV or the air broadcast
antenna" on page 10.) Use the recording device to
tune to the channel you want to record.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido