Publicidad
STEP 1
A
(4 pcs)
Attach middle support panel (#1) to side panels (#2)
with bolts (A) using Allen wrench (C).
Fije el panel de soporte central (#1) a los paneles
laterales (#2) con pernos (A) usando la llave Allen (C).
STEP 3
A
(8 pcs)
Combine both assembled pieces to cable
management bracket (#7) with bolts (A)
using Allen wrench (C).
Combine ambos pedazos montados al
soporte de la gerencia del cable (# 7)
con los pernos (A) usando la llave
Allen (C).
C
#1
#2
#2
C
#7
STEP 2
A (8 pcs)
Attach side panels (#3) to base panel (#4) and then base
panel (#5) with bolts (A) using Allen wrench (C). Then attach
side panels (#3) to cable management bracket (#6) with
bolts (A) using Allen wrench (C).
Fije los paneles laterales (#3) al
panel base (#4) y luego al panel
base (#5) con pernos (A) usando
una llave Allen (C). Luego fije los
paneles laterales (#3) al soporte
de gestión de cables (#6) con
pernos (A) usando la llave
Allen (C).
STEP 4
Assembly finished. Please refer to
STEP 5
to attach power strip.
Montaje terminado. Consulte el
PASO 5 para conectar la barra de
contactos.
2
C
#3
#3
#6
#4
#5
Publicidad
