Greenlee Communications GVIS300C Guia Del Usuario página 7

Hardware Overview
1. Power Button
Power Unit ON
With the GVIS300C unit powered OFF, press the Power
Button once to turn the unit ON. The GVIS300C will emit
a beep to indicate unit has powered ON. The Battery
Indicator LED will light up.
Put Unit to Sleep
With the GVIS300C fully powered ON, press the Power
Button briefly (less than 1 second) to put the unit into
"Sleep Mode". While in Sleep Mode, the Battery Indicator
LED will remain lit, and the screen will turn off. The unit
cannot be powered OFF while in Sleep Mode.
Wake Unit from Sleep
With the GVIS300C in Sleep Mode, press the Power Button
briefly (less than 1 second) to return the unit to its full
functionality. The screen will turn back on.
Power Unit OFF
With the GVIS300C powered ON, press and hold the Power
Button for 3 seconds, then release the Power Button to
turn the unit off. The unit will show a "Shutting Down"
indicator, then power down. The Battery Indicator LED will
turn off when the unit is fully shut down.
Hard Shutdown
With the GVIS300C powered ON, press and hold the Power
Button for 6-10 seconds to initiate a "Hard Shutdown".
The unit will beep twice to indicate a Hard Shutdown has
occurred. The LED will turn off when the unit is fully shut
down. The Hard Shutdown sequence should not be used
during normal operation. Loss of data may occur if the unit
is shut down inappropriately.
2. Battery Indicator LED
The Battery Indicator LED will change colors to inform the
user when the battery reaches certain levels of remaining
.
charge
Battery LED States
Green 100% to 31% Battery Remaining
Orange 30% to 11% Battery Remaining
Red 10% to 0% Battery Remaining
(cont'd)
3. 5" Touch Sensitive Screen
The full color touch-sensitive LCD on the GVIS300C
provides the user interface for most of the unit functions.
Pixel dimensions are 800 x 480.
4. Optical Power Meter Port
The power meter port (available on GVIS300C-PM-04-V
and GVIS300C-PM-02-V) provides the physical interface
for connecting patchcord jumpers to the GVIS300C
for the purposes of optical test and measurement.
Interchangeable adapters for the universal-style threaded
connector are available. See the Accessories section of
this guide for more information.
5. Micro USB Data Port
This port provides the interface for transferring data from
the GVIS300C to a compatible PC.
6. VFL Port
The VFL Port (available on GVIS300C-PM-04-V and
GVIS300C-PM-02-V) provides the physical interface
for connecting fiber jumpers to the GVIS300C for the
purposes of fault detection and continuity testing. The
2.5mm universal interface allows direct connection of
fibers to the 635nm 1mW red laser.
7. USB Instrument Input
This USB 2.0 Type A port allows connection of an HD
inspection scope for use with the GVIS300C system.
Additionally, users may plug a GVIS300C power meter into
this port to activate Optical Power Meter testing options
on the base model GVIS300C.
8. Battery Charger Input
The GVIS300C comes with a 12.6-volt
Lithium-Ion wall charger.
To charge the GVIS300C between uses, plug the wall
charger into an outlet and plug the charging adapter into
the battery charger port on the side of the GVIS300C.
The indicator light on the wall charger will be red when
charging and green when fully charged. Charge time is
approximately three hours.
www.GreenleeCommunications.com
7