OLITREM FGB Serie Instrucciones De Utilización Y Mantenimiento página 14

In case of damage:
 Must keep the cabinet away from the flames
 Ventilate the cabinet for a few minutes
 Disconnect the cabinet
 Contact the technical services.
The room where the equipment should be installed must be bigger than the quantity of
refrigerant fluid the equipment. In small places and in occurrence of a leak, can form a
mixture of gas inflammable.
For each 8g the refrigerant fluid, the room must be at least 1m
refrigerant is in the characteristic plate of the equipment, inside the cabinet.
The maintenance operations must be done by the manufacturer, its service agent
or similarly qualified persons in order to avoid hazard.
2.2- Recomendattions for use
 Before connecting the cabinet, check whether there as been any damage to the
cable and plug during transport.
 This device belongs to climatic class 4 (indicated in the plate of characteristics)
for what the allowable room temperature in which the device should function will
have to be between +16 ºC and +32º C.
 Do not touch the cabinet with wet or damp hands or feet.
 This device is not foreseen to be used by people (including children) whose
physical capacities, sensorial or mental are reduced, or people with lack of
experience or knowledge, except if they will be able to benefit, through a
responsible person for its security, of a monitoring or previous instructions relative
to the use of the device.
 Never disconnect the cabinet from the power point by pulling the power cable. Use
the ribbed area to grip the plug.
 Never use electronic device inside this device (warmer...) Danger of explosion.
 Never use mechanical devices for accelerate de defrosting, different than
recommended by the manufacturer. (e.g. Defrosting or cleaning the equipment
with a steam cleaner! The steam could reach the electric elements and cause
short circuit. Danger of electric shock.
 For defrosting and cleaning, must disconnect the cabinet.
 Don't use sharps objects for eliminate ice, this action could damage the tube
where circulates the cooling fluid. The cooling fluid could be in fire and cause
injuries on the eyes.
 Don't save inside the equipment products with propeller gas (e.g spays tin) and
explosive products. Danger of explosion.
 Don't use drawers, doors like support zone.
15.05.2018
3
The quantity of fluid
.
17
17