Publicidad
Idiomas disponibles
Idiomas disponibles
51. Position balusters 127004 and tighten component 001004 (Fig. 2).
52. Fix straight handrail 140053 using components 002031 (Fig. 2).
53. Depending on position and presence of walls around the stairwell, it may be necessary to position one or two
extra balusters 127004 (Fig. 9).
54. In this case, a space must be considered that is at the same distance from the other balusters or from the
wall. Drill landing with a 5 mm bit and assemble with components 033146, 001004 and 002040 (Fig. 2).
55. A ssemblyoffloor-mountedbalustrade,ifapplicable(Fig.15)
Determine the position of the posts on the floor, on average one every 12 cm and at a distanza of 8 cm from
the edge.
Take care: for circular balustrades, use the circular handrail to determine the distance of the posts from
the edge of the floor aperture – this distance varies according to the radius of the circular handrail supplied.
Drill with a Ø 12 mm bit and assemble components 033146 with items 008007. Fix the first balustrade
balusters (H= 910 mm) using component 033010 and items 008004, 011053, 033056 and 031066 (drill
with an Ø 8 mm bit). Insert the remaining 127004 balustrade balusters (H= 910 mm) into the 033146
components, with the 126034 reinforcing baluster and components 031066 about every metre, and lock
them with components 001004. Assemble the 140053 or 140331 handrails to the balusters with the
002031 components using item 046011 for straight balustrades and items 001038 and 046059 for circular
balustrades. Assemble any 031061, 031072, 031071 connecting components and the 031061 terminal
components.
Final assembly
56. To further reinforce the staircase at intermediate points, fix components 033010 to wall and join to the
balusters, using components 033056 and 031066. Drill with an 8 mm bit and use components 008004,
011053, 011057, 005035 (Fig. 12) (Fig. 14).
11 - Genius 010 - 020_2:Easy
Publicidad
