DHC BTW300 Manual Del Usuario página 7

The tester is shown and the TEST
block is now red, indicating that the
tester is connected and ready
for testing.
In this screen, the user may create a
name for the tester. Swipe the "TEST
>" area of the active tester to bring
up the Edit option.
5. Press "TEST" to enter the testing
process.
Select "battery test".
6.
Set up test on each icon to select
Battery Type, Rating and Set
Capacity (or Rated CCA).
7. Press "START TEST" to begin
testing.
At any time in the process, press
"< " to return to the previous screen.
• 7 •
6.