Seneca Z Serie Manual De Instrucciones página 28

Input type
Voltage
Current
Potentiometer
Thermocouple
Thermoresistance If RTD=NI100: -60°C; 250°C
If the LED ALARM is turned on (there is a input error or there is a fail error) and if detection of
input fail is activated, the module overwrites the outputs with «Fault values».
0 V; 10.5 V
0 mA; 21 mA
0; 100 %
If TC J: -210°C; 1200°C. If TC K: -270°C; 1370°C. If TC R: -
50°C;1760°C. If TC S: -50°C;1760°C.If TC T: -270°C; 400°C. If TC B:
0;1820°C. If TC E: -270°C; 1000°C. If TC N: -270°C; 1300°C
If RTD=PT100, RTD=PT500, RTD=PT1000: -200°C; 600°C
Module hardware limits
MI002282-E ENGLISH 12/16