Anti-Calc System; How To Clean And Store - lauson ASI117 Manual De Instrucciones

LAUSON
7. Stand your iron on its heel rest, plug it in to the mains supply socket and switch on.
Select the MAX temperature, allow your iron to heat up. Iron an old piece of cloth to allow
any remaining water to escape.

ANTI-CALC SYSTEM

A special filter inside the water tank softens the water and prevents scale build-up in the
soleplate. The filter is permanent and does not need replacing.
Note:Use tap water only. Distilled and demineralized water makes the anti-calc system
ineffective by altering its physicochemical characteristics.

HOW TO CLEAN AND STORE


After using, lift the iron with the filling hole downwards to empty the remaining water
from the Water tank.

Insert the plug into the socket, and set the Temperature Control Dial to "MAX" for 1-2
minutes to evaporate the remaining water, and then unplug the iron and let it cool
down before storing it.
ATTENTION:
When the plug connecting with the power socket, the user is not allowed to leave.
When the power cord is damaged, contact your dealers or an authorized service center
for repair.
In case of any repairs, replacement of cord or plug, or adjustment, please consult a
qualified technician, or take appliance to an authorized service facility.
IRON
ASI117
5
EN