Understanding Your M1800I/ M2800I Energizer Controller; Status Led - Gallagher M1800i Instrucciones

UNDERSTANDING YOUR M1800i/ M2800i
ENERGIZER CONTROLLER
Current Display
Shows the amount of load on the energizer /
earth / fence zones voltage

Status LED

Provides quick
indicati on of the
fence status
Zone
Indicators
Displays which
energizer / earth
/ fence zones are
operati ng and if
they are in alarm
Setti ngs butt ons
Change alarm levels and
energizer output voltage
Status LED
Green
Red
Flashing Red
Quickscan Bargraph
The Quickscan bargraph gives quick visual indicati on of the energizer output voltage.
Each bar illuminated represents approximately 1KV output.
Green Segments
Yellow Segments
Red Segments
10
Gallagher 3E2489 M1800i M2800i Energizer User Manual
Voltage Display
Shows energizer / earth / fence zones voltage
Standby butt on
Turns the energizer pulses
on and off
The energizer and fence are operati ng normally
The energizer has detected a fault. Check the LCD screen to
determine where the problem is.
The energizer output voltage is low.
Your fence is performing well. No att enti on is required.
Your fence is under some load but is sti ll delivering an
eff ecti ve shock.
Your fence is under heavy load and requires maintenance.
Quickscan
Bargraph
Gives fast visual
indicati on of fence
voltage
Zone Indicati on
Arrow
Highlights which
energizer / earth /
fence zone is being
shown on the main
display
Navigati on Butt ons
View energizer / earth /
fence zones to see zone
performance