LEXIBOOK RCD108 Series Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Play a CD
1. Lift the CD compartment lid, carefully place a disc on the centre spindle with the printed
label side facing up and close the CD compartment.
2. Slide the FUNCTION switch to CD position. The power indicator will light up and the LED
display will show the total number of tracks on the disc.
3. Press PLAY/PAUSE button and the CD will start playing from the first track.
4. Adjust the VOLUME control to set the sound level.
5. To pause playback, press PLAY/PAUSE button. The playback indicator on the display will
flash.
6. To resume playback, press PLAY/PAUSE once again. The playback indicator will glow
steadily.
7. To stop playback, press STOP
SKIP FORWARDS / SKIP BACKWARDS buttons
1. When the CD is stopped, to play your favourite track directly, locate the desired track
using SKIP FORWARDS or SKIP BACKWARDS and press PLAY/PAUSE.
2. When listening to a CD, press SKIP FORWARDS to play the next track. Press SKIP
BACKWARDS once to skip to the beginning of the track currently playing. Press the same
button twice or more to play the previous tracks.
3. To search forward or backward through the playing track, press and hold SKIP
FORWARDS or SKIP BACKWARDS to locate a specific musical passage. The player will
move forward or backward at high speed as long as the button is pressed. Stop pressing the
button to return to normal playback.
Note:
• If a disc is installed incorrectly, dirty or damaged, it will not play.
• As each track is played, the track number is shown on the display.
• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for
the disc to stop before opening the CD door. Never touch the lens when the CD door is open.
• Do not use the carrying handle when playing CD. The product should only be used on a
steady surface.
CD REPEAT PLAY
1. During CD playback, press the REPEAT button once to repeat the current track. The
repeat indicator will flash on the display.
2. Press the REPEAT button twice to repeat all tracks on the CD. The repeat indicator will
glow steadily.
3. To cancel the repeat feature, press the REPEAT button successively until the indicator
turns off.
RCD108seriesIM1486_V05_217.indd 16
CD OPERATION
16
16
2/12/16 4:18 pm

Publicidad

Tabla de contenido
loading

Tabla de contenido