Installation And Setup; To Insert And Remove The Battery - Petsafe PBC17-13475 Manual De Funcionamiento

Installation and Setup

The Deluxe Outdoor Bark Control should be placed facing the dog and within range of the
dog. The unit is designed with provisions for hanging or it can also stand alone and should be
positioned at a height of no more than 1.5 m. It can be placed in a tree, hanging from a pole,
on a fence post, etc. For best results, the area between the Deluxe Outdoor Bark Control and the
dog should be free of any large obstacles.

To Insert and Remove the Battery

Important: When inserting or removing battery, setting the clock, or programming the timer(s),
no dog(s) should be within range of the unit to ensure they don't receive a stimulation during
set-up.
1. The Deluxe Outdoor Bark Control utilizes a replaceable 9-volt battery (not included). The
battery door is located on the bottom of the unit. Pull the battery door open.
2. Insert the 9-volt battery with the positive side oriented as shown.
3. To replace the battery door, position the top edge and then snap the bottom of battery door
into place.
4. After installing the battery, the Deluxe Outdoor Bark Control will be ON and will begin to
detect and correct barking. The LCD display will be blank with the exception of the battery
indicator until the clock and timers are set.
Note: Ensure a working 9-volt battery is installed in the battery compartment.
6 www.petsafe.net