Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Guía de instalación rápida
TEW-691GR
1.01

Publicidad

Tabla de contenido
loading

Resumen de contenidos para TRENDnet TEW-691GR

  • Página 1 Guía de instalación rápida TEW-691GR 1.01...
  • Página 2: Tabla De Contenido

    Table of Contents Español 1. Antes de iniciar 2. Instalación del Hardware 3. Configuración del enrutador inalámbrico Troubleshooting Version 05.11.2010...
  • Página 3: Español

    1. Antes de iniciar Contenidos del paquete TEW-691GR Guía de instalación rápida multilingüe CD-ROM (Herramienta) Cable Ethernet Cat. 5 (1.5mts / 4.9 pies) Adaptador de alimentación (12V DC, 1A) Requisitos del sistema Un PC con adaptador de red alámbrico o inalámbrico instalado de manera correcta Navegador Web: Internet Explorer (6.0 ó...
  • Página 4: Instalación Del Hardware

    Etnernet del PC. 4. Conecte el adaptador de alimentación AC al TEW-691GR y luego a una toma de corriente. Encienda su cable módem o DSL 5. Mueva el switch de poder a la posición de encendido.
  • Página 5: Configuración Del Enrutador Inalámbrico

    3. Configuración del enrutador inalámbrico Nota: Es recomendable configurar el enrutador inalámbrico desde un PC por cableado. 1. Abra el navegador Web, introduzca http://192.168.10.1 en la barra de direcciones, luego pulse la tecla Enter (Intro). 2. Introduzca el User name (Nombre de Usuario) y Password (contraseña), y después pulse OK.
  • Página 6: Registre Su Producto

    Su configuración inalámbrica ha finalizado. Para obtener información más detallada sobre la configuración y las opciones de configuración avanzadas de la TEW-691GR, por favor consulte la sección de resolución de problemas en el CD-ROM de la Guía del Usuario, o el sitio Web de...
  • Página 7: Troubleshooting

    Troubleshooting 1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-691GR's web configuration page? Check your hardware settings again by following the instructions in Section 2.
  • Página 8 1. Make sure that the WLAN switch on the back of the router is set to on. 2. Double check that the WLAN light on the Router is lit. 3. Power cycle the TEW-691GR. Unplug the power to the TEW-691GR. Wait 15 seconds, then plug the power back in to the TEW-691GR.
  • Página 12 Copyright ©2010. All Rights Reserved. TRENDnet.

Tabla de contenido