Operation; Shutting Down; Storage; Transport - Kärcher HKF 50 E Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35

Operation

DANGER
Risk of injury on account of the escaping
water jet that could be hot!
– Only use the interior cleaner in closed
containers.
– Only insert the interior cleaner into a
container or switch it into another con-
tainer while the separate high pressure
pump and internal drive are turned off.
 Place interior cleaner onto container
and lock it.
 Connect the high pressure pump to the
interior cleaner via a high pressure
hose.
 Interior cleaners with electric drives:
Plug in the mains plug.
 Interior cleaners with compressed air
drives: Open the compressed air sup-
ply.
 Open the cleaning liquid supply.
 Switch on the separate high pressure
pump.
Note: With almost all cleaning tasks, 2 noz-
zles will achieve a good cleaning result.
With very large and extremely dirty contain-
ers, 1 nozzle is used; the other one is
locked with a screw.
Advantage:
– Better cleaning result by larger spray
width and impact force of the cleaning
jet.
Disadvantage:
– The bearings and seals are stressed
more and will wear faster.
– Extension of the cleaning time.

Shutting down

Note: Flush the interior cleaner for 30 sec-
onds without adding detergents prior to
shutting it down. This will avoid crusting
and adhesion and thus premature wear of
the seals.
 Switch off the separate high pressure
pump.
 Shut off the cleaning liquid supply.
 Interior cleaners with electric drives:
Pull out the mains plug.
 Interior cleaners with compressed air
drives: Shut off the compressed air sup-
ply.
 Remove the interior cleaner from the
container.

Storage

CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.

Transport

CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
16

Care and maintenance

The basis for a safe operational plant is
regular maintenance.
Use only original parts of the manufacturer
or part suggested by him, such as
– replacement and wear parts
– Accessory parts
– Fuel
– Detergent
DANGER
Risk of accident while working on the unit!
During all tasks:
 Remove voltage from and secure high
pressure pump at the main switch.
 Shut off the cleaning liquid supply.
 Interior cleaners with electric drives:
Pull out the mains plug.
 Interior cleaners with compressed air
drives: Shut off the compressed air sup-
ply.
Who may perform maintenance?
 Operator
Work designated with the sign "Opera-
tor" may only be carried out by persons
who have been instructed in the safe
operation and maintenance on the high
pressure plant.
Maintenance contract
In order to guarantee a reliable operation of
the equipment, we success, you signed a
maintenance agreement. Please refer to
your local Kärcher service department.
6
-
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hkf 50 p

Tabla de contenido