Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Configuration And Operation
4.
Configuration And Operation
The Net-X is configured through the control panel, using the control panel buttons. Once the
Net-X is properly configured it operates without user intervention.
The Net-X can be used as a DMX splitter, in which case the DMX In ports must be assigned
to the DMX Out ports, but the Net, Subnet, and IP address settings may not need
configuration.
The Net-X can be used as an Art-Net™ node, in which case the Art-Net™ universes must be
assigned to the DMX Out ports, and the Net, Subnet, and IP address settings must be
configured.
The Net-X can be used as an sACN node, in which case the sACN universes must be
assigned to the DMX Out ports, and the IP address settings must be configured.
The Net-X can be used as both a DMX splitter and either an Art-Net™ or sACN node
simultaneously, in which case both the DMX assignments and the Art-Net™ or sACN settings
must be configured. For more information, see Example Configurations.
The Net-X can be used to merge two DMX, Art-Net™, or sACN signals from different
controllers and output as one signal, using LTP (Latest Takes Precedence) and HTP (Highest
Takes Precedence) functions.
DMX In ports and Art-Net™ or sACN universes can be assigned to multiple DMX Out
ports.
Control Panel
The control panel is the mechanism for configuring the Net-X settings. It has a small LCD
screen and four buttons, which are described below.
<MENU>
<DOWN>
<ENTER>
Page 14 of 64
Button
Scrolls through the first level of options, or exits from the current menu or
function
Navigates upward through the menu list or increases the numeric value
<UP>
when in a function
Navigates downward through the menu list or decreases the numeric value
when in a function
Enables the currently displayed menu or sets the currently selected value in
to the current function
Function
Net-X User Manual Rev. 4
Publicidad
Tabla de contenido
