What Is Included; Resetting The Breaker; Floor Mounting Diagram - Chauvet Professional Cloud 9 Guía De Referencia Rápida

What is Included

• Cloud 9
• Seetronic Powerkon power cord
• Directional hose and clamp
• Quick Reference Guide
AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC,
50 Hz, depending on the specific model purchased.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
The 120V version of the Cloud 9 consumes more than 20A of power, and thus requires 2
power cords, with each on its own circuit to operate.

Resetting the Breaker

This product is equipped with a resettable circuit breaker. If the breaker trips, all sections of this product will lose power.
1. Remove the power cord from mains power.
2. Allow unit to cool for 15 minutes.
3. After 15 minutes, attempt to reset the breaker by pressing the button.
4. Plug the product's power cord into the power outlet and continue using as recommended.

Floor Mounting Diagram

Wheel locks (x4) for
floor mounting
Condensation may form on the bottom of the product, creating damp or wet conditions
under and around the Cloud 9. Use caution! Surfaces around the product may become
slippery.
Cloud 9 QRG Rev. 8
QUICK REFERENCE GUIDE
Floor Mounting
EN
2