Replacing Battery - THOMSON DS60DUO Modo De Empleo

Overview of Remote Control
The remote control operates on 1 pc CR2025 lithium battery (included).to power up the remote control,
remove the insulation tab from the back unit

Replacing battery

The remote control works with lithium button cell
CR2025 3V batteries. When the remote no longer works
you need to replace the batteries as follows:
• Press the tab on the side of the battery cover to
release it and allow the battery support to come out.
• Replace the battery paying attention to the correct
orientation of the poles.
• Replace the battery support pushing it inside until you hear a "click".
ATTENTION: Danger of explosion if batteries are not inserted correctly.
1. POWER
Press to power the tower off and on
2. MUTE
Press to Mute or restore volume
3. EQ RESET
Press to restore sound effect
4. VOICE
Press to EQ -VOICE mode
5.
Skip to the previous track
6.
start or pause play
7. TREBLE+/TREBLE-
Press to adjust treble level
8. BASS+/BASS-
Press to adjust bass level
9. AUX
Press to AUX IN mode
10. SD
Press to SD mode
11. LINE IN
Press to LINE IN mode
12. USB
Press to USB mode
13. BT
Press to BT mode
14. MOVIE
Press to EQ-MOVIE mode
15. MUSIC
Press to EQ-MUSIC mode
16.
Skip to the next track
17. VOLUME+/-
Press to adjust the volume level
- EN 5 -
CR2025