Certifications; Opening The Package; Contents Of The Package - Urmet 1093/184M11 Guía Rápida

In case of repair, we suggest to save the recorded data before taking the card to the repair center.
URMET S.p.A. is not in any way responsible for the loss of recorded data.
Video recording
This device is not designed as a burglar system but mainly to transmit and record video images. URMET
S.p.A. is not in any way responsible for loss or damages of the user consequent to theft.
Before using the device, record a demo video to verify the correct functionality of this feature. URMET
S.p.A. is not in any way responsible for loss of recorded data consequent to wrong setting or usage,
device misfunctioning or failure.
This device is composed by electronic precision components. Do not hit the device while recording as it
might affect the video.
Privacy and Copyright
The IP camera is designed for surveillance systems. Video recording is subject to the laws applicable to
the Country where used.It is forbidden to record images with Copyright.
The User is responsible to check and respect all local laws and norms for video signal recording. The
manufacturer is NOT in any way liable for any usage of the product which might result not compliant to
the relevant norms. For further information please visit http://www.garanteprivacy.it/web/guest/home_en
Firmware upgrade
Refer to URMET S.p.A. Customer Service Technical Assistance periodically to check availability of
firmware upgrades.
Network configuration
Camera default setting is DHCP mode. If the network does not support dynamic addressing (DHCP),
the device will automatically switch to factory IP 192.168.1.200. Use Urmet "IP-Discovery" software to
modify the IP address and other network settings to prevent any conflict with other devices on the
network.
Once the camera is correctly connected and configured on the IP network it will be possible to show
video and settings on any PC or smartphone.
Network connections
When connecting a PC (using Software Client or Browser), any video channel on the PC will be using
"unicast" connection (TCP, RTP, UDP).
The device can support up to 5 "unicast" connections so it is possible to show the video on maximum 5
remote devices (PC or smartphone) at the same time depending on the available network band.
1.2

CERTIFICATIONS

Urmet S.p.A. hereby declares that the Urmet Cloud wireless surveillance cameras models 1093/184M11, 1093/184M12,
1093/184M14, 1093/184M15 and 1093/184M16 comply with the essential requirements and other relevant provisions of
Directive 1999/5/EC. The Declaration of Conformity can be downloaded from the website at www.urmet.com or
requested from Urmet Customer Care.
1.3

OPENING THE PACKAGE

Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts are either missing or
damaged. Do not attempt to use the device in this case. Send the product back in its original packing if it is damaged.
1.3.1

Contents of the package

1 IP camera
1 aerial (1093/184M11, 1093/184M12, 1093/184M15 and 1093/184M16 only)
1 bracket (1093/184M11, 1093/184M12, 1093/184M15 and 1093/184M16 only)
1 power unit
1 network cable
1 CD containing complete documentation
1 A5 sheet containing the univocal IDs of the device: UID and MAC address
This quick start guide
IMPORTANT NOTE
Accessories may vary without prior notice.
DS1093-106A 16