Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing the speaker with your Bluetooth
1.
Place both devices not more than one meter away from each other.
2.
Enable the Bluetooth function on your device and set it to discover the KWS-615 wireless speaker.
3.
On the speaker, briefly press the Source button. The blue LED will start blinking fast.
4.
Once the speaker is listed under the newly found Bluetooth devices, accept by pressing
Yes or OK.
5.
If you have a lower Bluetooth version, you may be prompted to enter the passkey=0000 (4 zeros).
6.
If pairing is successful, the LED will change to steady blue and your device will confirm that the
connection has been established.
7.
If after 60 seconds the pairing process fails, please repeat steps 1 through 5 described above.
8.
From then on, your device will be automatically paired with the speaker.
Technical specifications
device
®
Publicidad
Tabla de contenido
