Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Make sure that you read and understand this manual completely before using this system. This manual shall be available for
everyone assembling, disassembling or loading the Power Dynamic Deck750.
For health and safety reasons people assembling, disassembling, transporting and maintaining the stage deck should wear
adequate Personal Protection Equipment like, gloves, hard heads and safety shoes. Elements weighting 20 kg or more shall be
carried by at least 2 persons.
SCOPE
DECK750 is modular framework with different types of topping to be used as raised platform for purposes of displaying,
performances etc

LIMITATIONS OF USE

Due to its natural action, the plywood may shrink and expand depending on its humidity and the ambient temperature. It should
be used at a humidity level between 22% and 42% and a temperature between 18 and 26°C.
ASSEMBLY INSTRUCTIONS
Tools required:
Open-end spanner 13
Spirit level
NOTE: Please check all connections such as deck to deck clamp, leg to leg clamp and the overall stability of the system before
loading.
FIXED LEG ASSEMBLY
1.
Put the required leg type in the leg adapter at the underside of the deck frame.
2.
Tighten the leg by tightening the knob.
3.
Do this at all 4 corners.
4.
Tip the deck over.
TELESCOPIC LEG ASSEMBLY
IMPORTANT! After levelling the stage height fasten the securing self-locking nuts as shown on the diagram.
WARNING! It is forbidden to use the stage decks without securing the legs with self-locking nuts!
ATTENTION! Please make sure that the complete unit is stable and well assembled before using it.
ENGLISH
3

Publicidad

Tabla de contenido
loading

Tabla de contenido