Power Dynamics DECK750 Manual De Instrucciones página 51

TECHNICAL SPECIFICATION / TECHNISCHE SPECIFICATIE / TECHNISCHE
DATEN / ESPECIFICACIONES TÉCNICAS / SPÉCIFICATIONS TECHNIQUES /
SPECYFIKACJA TECHNICZNA
Frame:
Finish:
Uniformly distributed load:
Point load F1:
Point load F2:
In compliance with:
* The point load should be applied to a minimum arear of 50x50mm
* Point load to be placed as indicated on below drawing.
* 1 Point load total allowed
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed
without prior notice.
Aluminium (EN AW-96005 T6)
Plywood
750kg/m2
300kg
300kg
DIN EN1991-1 (Eurocode1)
DIN EN1995 (Eurocode1)
DIN EN1999 (Eurocode1)
DIN 15921
51