Metra 99-4000 Instrucciones De Instalación

GM 1982-2005
KIT FEATURES
• DIN radio provision with CD jewel case pocket
KIT COMPONENTS
• A) Bracket set "A" • B) Bracket set "B" • C) Bracket set "C"• D) Radio housing • E) (2) Keps nuts
• F) (2) Studs • G) (2) Tape strips • H) (2) Carriage bolts • I) (2) Pal nuts
A B C
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Please visit metraonline.com for harness options
Antenna Adapter: • 40-GM10
METRA. The World's best kits.
Installation instructions for part 99-4000
(equipped with J-2000 panel-style radio)
99-4000
D E
APPLICATIONS
See application list inside cover
metraonline.com
™
Dash Disassembly
–
Kit Preparation ........................................................3
Kit Assembly ...........................................................4
TOOLS REQUIRED
F G
• Phillips screwdriver • Socket wrench
H I
Table of Contents
Please see metraonline.com/part/ 99-4544_web.pdf
for a list of Dash Dissasembly instructions
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION