Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 95-8245CHG
Toyota Corolla 2014 - up
KIT FEATURES
• Double DIN radio provision
• Painted charcoal high gloss
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) (2) Panel clip mounts • D) (4) #4 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 - Toyota harness • TYTO-01 - Toyota amplified interface
Antenna Adapter: • 40-LX11 - Toyota/Lexus
METRA. The World's best kits.
APPLICATIONS
95-8245CHG
C
1-800-221-0932
™
Dash Disassembly
–
Toyota Corolla 2014-up ........................................ 2
Kit Assembly
– Double DIN radio provision ................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
D
• Socket wrench
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
Table of Contents
Publicidad
Tabla de contenido
Manuales relacionados para Metra 95-8245CHG
Resumen de contenidos para Metra 95-8245CHG
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-8245CHG APPLICATIONS Table of Contents Toyota Corolla 2014 - up 95-8245CHG Dash Disassembly – Toyota Corolla 2014-up ........2 Kit Assembly – Double DIN radio provision ........3 KIT FEATURES • Double DIN radio provision • Painted charcoal high gloss KIT COMPONENTS •...
-
Página 2: Dash Disassembly
95-8245HG Dash Disassembly 1. Unclip and remove the entire panel around the radio from the instrument cluster to the passenger side of the dash including the clock and A/C vents. (Figure A) Tip: Start on the passenger side with the glove box open. 2. -
Página 3: Kit Assembly
(Figure A) 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Mount the radio/bracket assembly into the dash with the factory hardware. - Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-8245CHG NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
-
Página 5: Herramientas Requeridas
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8245CHG AplicAciones Indice Toyota Corolla 2014 y mas 95-8245CHG Desmontaje del tablero – Toyota Corolla 2014 y mas ........2 Ensamble del kit – Provisión de radio doble DIN ........3 cArActerísticAs del kit • Provisión de radio doble DIN •... -
Página 6: Desmontaje Del Tablero
95-8245CHG Desmontaje del tablero 1. Desenganche y quite todo el panel alrededor del radio desde el conjunto de instrumentos al tablero del lado del pasajero, incluyendo el reloj y las rejillas del aire acondicionado. (Figura A) Sugerencia: Empiece en el lado del pasajero con la guantera abierta. -
Página 7: Ensamble Del Kit
2. Localice el arnés de cableado de 6. Enganche la carcasa del radio fábrica y el conector de la antena sobre el ensamble del radio/ en el tablero. Metra recomienda soporte. que use adaptadores de 7. Vuelva a armar el tablero al revés acoplamiento adecuados de Metra de como lo desarmó. - Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8245CHG EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.