Getting Started; Installing The Sim Card And The Battery; Charging The Battery - Nevir NVR-S50 S1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting started

3.1 Installing the SIM Card and the Battery

A SIM card carries useful information, including your mobile phone
number, PIN (Personal Identification Number), PIN2, PUK (PIN
Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International
Mobile Subscriber Identity), network information, contacts data, and
short messages data.
Note:
After powering off your mobile phone, wait for a few seconds before
removing or inserting A SIM card.
Exercise caution when operating A SIM card, as friction or bending
will damage the SIM card.
Properly keep the mobile phone and its fittings such as the SIM
cards beyond children's reach.
Installation
◆ Hold the power key for a while and select power off to power off
the mobile phone
◆ Take the back cover away.
◆ Insert the SIM Card into the SIM Card slot lightly with the corner
cutting of the card aligning to the notch of the slot and the gold plate
of the card facing download, till the SIM Card cannot be further
pushed in.
◆ With the metallic contacts of the battery facing the metallic contacts
in the battery slot, install the battery.
Note:
The SD card is a miniature object. Keep it out of the reach of
children for fear that children swallow it!

3.2 Charging the Battery

◆ Your mobile phone can monitor and display the battery state.
◆ Normally the remaining energy of the battery is indicated by the
battery level icon at the upper right corner of the display screen.
◆ When the battery energy is insufficient, the mobile phone prompts
"Battery low".
30

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido