Class 3R Rsp2 And Sfp1 Laser Emissions; Safety Illustration Of Class 3R Rsp2 And Sfp1 - Renishaw REVO­-2 Guia Del Usuario

Guía del usuario de REVO­2
www.renishaw.es
EN - Safety
CAUTION: Before unpacking and installing the REVO-2 system, the user should carefully read the safety instructions below and
ensure that they are followed at all times by all operators.
The RSP2, RSP2 V2, SFP1 and RSP3-x are only to be used with the Renishaw REVO and REVO-2 head.
Operators must be trained in the use and application of the REVO and REVO-2 system and accompanying products, in the context
of the machine it is fitted to, before being allowed to operate that machine.
Permanent magnets are used in some components of the REVO-2 system and associated products. It is important to keep them
away from items which may be affected by magnetic fields, e.g. data storage systems, pacemakers and watches etc.

Class 3R RSP2 and SFP1 laser emissions

References are made to features indicated as † and ‡ in the illustrations below. Please ensure that you understand all safety instructions.
Familiarisation with the REVO-2 system components is recommended.

Safety illustration of Class 3R RSP2 and SFP1

These versions of RSP2 and SFP1 have been classified as Class 3R laser products according to EN 60825-1:2007. This classification is based
on the laser power that would be emitted in the unlikely event of breakage of the stylus holder, as required by the 'single fault' criteria in EN
60825-1. In the absence of such a fault, the emitted laser power is negligible.
Key
† Interlock switch contacts
CAUTION: Do not remove the safety warning labels located on both the RSP2 and SFP1 probe body.
Edición 08 2019
‡ Laser aperture and optical window
61