Welcome - Strand Lighting 200 Consola Manual De Operaciones

Welcome

Thank you for buying Strand Lighting control equipment. We hope that you will find that
your lighting needs are met by your new system and that you will enjoy exploring the new
facilities that your new system offers. You are provided with essential information to help
you install and operate your system. Please look through all the documents and keep them
safely for future use. If you have any difficulties, please do not hesitate to contact Strand
Lighting or any authorized Strand service center for advice.
This equipment is designed to operate from the main electrical supply and contains voltages,
which, if touched, may cause death or injury. It should only be operated in accordance with
the instructions provided and for the purpose of a lighting control
system.
Do not open the console. There are no user serviceable parts inside.
Avoid spilling liquid on the equipment If this should happen, switch the equipment off
immediately. To reduce the risk of fire or electric shock, do not expose the equipment to rain
or moisture.
For indoor use only.
This equipment is designed and manufactured to comply with international safety standards
1EC950, UL1950, CS950 and is intended for use as part of a lighting control system. It must
not be used for other purposes where there is a risk of safety to persons.
The equipment contains power voltages, socket outlets will be installed near the equipment
and be easily accessible.
• Working Voltage/Current 100-120 (2A) 220-240 (1A)
• Frequency 50/60 Hz
• Max Ambient Temp 350C
• Do not restrict ventilation
This manual describes the installation and operational procedures for Strand Lighting's 200
Control Console.
Strand – Manual Consola 200 2
(Traducido por GRAU LUMINOTECNIA, S.A.)