Installation In Rack - Bosch Plena Feedback Suppressor Manual De Instalación Y Funcionamiento

Plena Feedback Suppressor | Installation and Operating Manual |
2

Installation in rack

figure 2. 1 : Installation in rack
The feedback suppressor is delivered for tabletop use, but you can mount it in a 19" rack using the brackets supplied
with the unit. In case of rack mounting, you must:
• Remove the 4 feet from the bottom of the unit. Without the feet, the unit is 1U high.
• Ensure that the ambient temperature of the unit in the rack does not exceed 55 °C.
Bosch Security Systems | 2003-11 | 9922 141 81681
Installation in rack en | 10